Physical and chemical properties of three wild almond wood species grown in Zagros forests

Fizikalne in kemijske lastnosti lesa treh divjih vrst mandljevca, ki rastejo v gozdovih Zagrosa

Authors

  • Leila Fathi
  • Redžo Hasanagić
  • Yaghoob Iranmanesh
  • Mohammad Dahmardeh Ghalehno
  • Miha Humar
  • Mohsen Bahmani

DOI:

https://doi.org/10.26614/les-wood.2022.v71n01a03

Keywords:

Amygdalus, wood, density, volume shrinkage, cellulose, lignin, Zagros, Iran

Abstract

In this study, the physical properties (oven-dry density, basic density, volumetric shrinkage, and swelling) and structural components (cellulose, lignin, and extractives content) of three wild almond wood species from southwestern Iran, namely Amygdalus arabica, Amygdalus eburna, and Amygdalus scoparia, were investigated. Wild almond is a valuable wood species in the Zagros forests of Iran, but there is a lack of data on their wood properties. Three adult trees of each species were chosen, and samples were prepared from the breast height diameter to measure the focal properties. Results of analysis of variance (ANOVA) showed that the wood species had a significant effect on the wood density and volumetric shrinkage. Maximum oven-dry density and volumetric shrinkage of wood were identified in Amygdalus scoparia. The highest and lowest content of structural components were found in Amygdalus scoparia and Amygdalus arabica wood species, respectively. A deep understanding of the almond wood characteristics will provide a fresh insight into the relationship between the properties and conservation of these special, as well as applications of their wood.

Downloads

Download data is not yet available.

References

Allué, E., Expósito, I., Tumung, L., Ollé, A., & Bazgir, B. (2018). Early evidence of Prunus and Prunus cf. amygdalus from Palaeolithic sites in the Khorramabad Valley, western Iran. Comptes Rendus Palevol, 17(6), 335-345. DOI: https://doi.org/10.1016/j.crpv.2018.01.001

ASTM D 143-94 (2000). Standard Test Methods for Small Clear Specimens of Timber, Philadelphia, PA., USA.

Bahmani, M., Fathi, L., Koch, G., Kool, F., Aghajani, H., & Humar, M. (2020). Heartwood and sapwood features of Sorbus torminalis grown in Iranian forests. Wood Research, 65, 195-204. DOI: https://doi.org/10.37763/wr.1336-4561/65.2.195204

Bahmani, M., Saeidi. S., Humar, M., & Kool, F. (2018). Effect of tree diameter classes on the properties of Persian oak (Quercus brantii lindl.) wood. Wood Research, 63, 755-762.

Balvardi, M., Mendiola, J. A., Castro-Gómez, P., Fontecha, J., Rezaei, K., & Ibáñez, E. (2015). Development of pressurized extraction processes for oil recovery from wild almond (Amygdalus scoparia). Journal of the American Oil Chemists' Society, 92(10), 1503-1511. DOI: https://doi.org/10.1007/s11746-015-2708-2

Britannica Online Encyclopaedia (2022). Britannica Online Encyclopaedia. Britannica. https://www.britannica.com

Dong, H., Bahmani, M., Humar, M., & Rahimi, S. (2021). Fiber morphology and physical properties of branch and stem wood of hawthorn (Crataegus Azarolus L.) grown in Zagros forests. Wood Research, 66(3), 391-402. DOI: https://doi.org/10.37763/wr.1336-4561/66.3.391402

Franklin, G. L. (1945). Preparation of thin sections of synthetic resins and wood-resin composites, and a new macerating method for wood. Nature, 155(3924), 51-51. DOI: https://doi.org/10.1038/155051a0

Gradziel, T. M. (2011). Almond origin and domestication. In: Horticultural Reviews Vol. 38 ed Janick J. (Hoboken, NJ: John Wiley & Sons), 23–82. DOI: https://doi.org/10.1002/9780470872376.ch2

ISO 13061-14 (2016). Physical and mechanical properties of wood. Test methods for small clear wood specimens. Part 14: Determination of volumetric shrinkage.

Khatamsaz, M. (1988). Studies on the Rosaceae family in Iran, new taxa and new records. The Iranian Journal of Botany (Iran), 4(1), 111-125.

Kiaei, M. (2012). Effect of site and elevation on wood density and shrinkage and their relationships in Carpinus betulus. Forestry Study in China, 14, 229–234. DOI: https://doi.org/10.1007/s11632-012-0310-3

Kiaei, M., & Samariha, A. (2011). Fiber dimensions, physical and mechanical properties of five important hardwood plants. Indian Journal of Science and Technology, 4(11), 1460-1463. DOI: https://doi.org/10.17485/ijst/2011/v4i11.8

Nazari, N., Bahmani, M., Kahyani, S., & Humar, M. (2021). Effect of site conditions on the properties of hawthorn (Crataegus azarolus L.) wood. Journal of Forest Science, 67(3), 113-124. DOI: https://doi.org/10.17221/125/2020-JFS

Nazari, N., Bahmani, M., Kahyani, S., Humar, M., & Koch, G. (2020). Geographic variations of the wood density and fiber dimensions of the Persian oak wood. Forests, 11(9), 1003. DOI: https://doi.org/10.3390/f11091003

Nikoumanesh, K., Ebadi, A., & Fattahi, M. R. (2009). An investigation of genetic diversity among some almond genotypes and species by morphological traits. In: International Symposium on Pistachios and Almonds. 912, 377-383. DOI: https://doi.org/10.17660/ActaHortic.2011.912.55

Pásztory, Z., Börcsök, Z., Ronyecz, I., Mohácsi, K., Molnár, S., & Kis, S. (2014). Oven dry density of sessile oak, turkey oak and hornbeam in different region of Mecsek Mountain. Wood Research, 59(2), 683-694.

Pettersen, R. (1984). The chemical composition of wood. In: Rowell, R. M. (ed), The Chemistry of Solid Woods, Advances in Chemistry Series 207. Washington: American Chemical Society, 57-126. DOI: https://doi.org/10.1021/ba-1984-0207.ch002

Rowell, R. M., Young, R. A., & Rowell, J. K. (1997). Paper and composites from Agro-based resource. Boca Raton: CRC Lewis publisher, 446 pp.

Sagheb-Talebi, K., Sajedi, T., & Yazdian, F. (2004). Forests of Iran. Tehran: Research Institute of forests and Rangelands: 28.

Sousa, V. B., Louzada, J. L., & Pereira, H. (2018). Variation of ring width and wood density in two unmanaged stands of the Mediterranean Oak (Quercus faginea). Forests, 9, 1-10. DOI: https://doi.org/10.3390/f9010044

TAPPI Test Method T 204 om-88 (1988). Standard test methods for solvent extractives of wood and pulp.

TAPPI Test Method T 222 om-98 (1998). Standard test methods for acid-insoluble lignin in wood and pulp.

Wagenfuhr, R., & Scheiber, C. (1985). Holzatlas. In: Liese W. (ed.): Wood Science and Technology. 2nd Ed. Leipzig: VEB Fachbuchverlag: 110.

Zeidler, A., & Borůvka, V. (2016). Wood density of northern red oak and pedunculate oak grown in former brown coal mine in the Czech Republic. BioResources, 11(4), 9373-9385. DOI: https://doi.org/10.15376/biores.11.4.9373-9385

Zobel, B. J., & Van Buijtenen, J. P. (2012). Wood variation: its causes and control. Springer Science & Business Media.

Zohary, D., & Hopf, M. (2000). Domestication of plants in the Old World: The origin and spread of cultivated plants in West Asia, Europe and the Nile Valley (No. Ed. 3). Oxford university press.

Downloads

Published

26.07.2022

Issue

Section

Articles

How to Cite

Fathi, L., Hasanagić, R., Iranmanesh, Y., Dahmardeh Ghalehno, M., Humar, M., & Bahmani, M. (2022). Physical and chemical properties of three wild almond wood species grown in Zagros forests: Fizikalne in kemijske lastnosti lesa treh divjih vrst mandljevca, ki rastejo v gozdovih Zagrosa. Les/Wood, 71(1), 23-30. https://doi.org/10.26614/les-wood.2022.v71n01a03

Similar Articles

1-10 of 120

You may also start an advanced similarity search for this article.