Primerjava lastnosti obložene cementno-iverne plošče in površinsko obdelane furnirne plošče

Comparison of properties of surfaced cement-bonded particleboard and surface finished plywood

Authors

  • Jure Žigon
  • Primož Habljan

DOI:

https://doi.org/10.26614/les-wood.2018.v67n01a02

Keywords:

façade covering, wood-based composites, durability, artificial accelerated weathering

Abstract

In this study, we produced two types of claddings, representing the element of the ventilated façade. The first façade cladding was a cement-bonded particleboard, surfaced with a low-pressure laminate, while the second was a waterproof plywood board, coated with a stain-coating system. Both types of façade claddings were exposed to processes of artificial accelerated aging and temperature cycling tests, as well as to biotic factors, in order to simulate the conditions in real use. Changes in climatic conditions and other factors of the performed tests had a larger influence on the behaviour and properties of the surface finished plywood board. Both types of composites were not susceptible to infection with wood decay and blue-stain fungi. According to the results of the research, both types of claddings are suitable for the intended use as the outer element of a ventilated façade.

Downloads

Download data is not yet available.

Downloads

Published

20.06.2018

Issue

Section

Articles

How to Cite

Žigon, J., & Habljan, P. (2018). Primerjava lastnosti obložene cementno-iverne plošče in površinsko obdelane furnirne plošče: Comparison of properties of surfaced cement-bonded particleboard and surface finished plywood. Les/Wood, 67(1), 15-26. https://doi.org/10.26614/les-wood.2018.v67n01a02

Similar Articles

1-10 of 114

You may also start an advanced similarity search for this article.

Most read articles by the same author(s)

<< < 1 2