Uporaba naravnih olj za površinsko zaščito lesa navadne bukve

Usage of natural oils for surface protection of common beech wood

Authors

  • Jure Žigon
  • Ajda Pogorelčnik
  • Marko Petrič
  • Matjaž Pavlič

DOI:

https://doi.org/10.26614/les-wood.2017.v66n02a04

Keywords:

Fagus sylvatica, natural drying oils, properties, tensiometer, wettability

Abstract

Different natural drying oils were used for surface finishing of common beech wood (Fagus sylvatica L.). Surface performances and properties of the oiled surfaces were investigated according to the standard tests. Drying time, colour and gloss changes, uptake of oils into wood and uptake of liquid water into oiled wood, were determined, and the wettability of oiled wood surfaces was investigated by determination of the apparent contact angles of water. The results of the standard resistance tests showed that tung oil, the commercial decking and linseed oil had the best water repellent and protective properties. Worse properties were determined for those surfaces finished with walnut, hemp and coconut oils.

Downloads

Download data is not yet available.

Downloads

Published

30.11.2017

How to Cite

Žigon, J., Pogorelčnik, A., Petrič, M., & Pavlič, M. (2017). Uporaba naravnih olj za površinsko zaščito lesa navadne bukve: Usage of natural oils for surface protection of common beech wood. Les/Wood, 66(2), 37–46. https://doi.org/10.26614/les-wood.2017.v66n02a04

Issue

Section

Articles

Most read articles by the same author(s)

<< < 1 2