Physical and mechanical properties of the stem and branch wood of West African ebony (Diospyros mespiliformis)

Joseph Zakaria; Francis Kofi Bih; Issah  Chakurah; Kwaku  Antwi; Clara Lily Korkor  Tetteh

doi:10.26614/les-wood.2024.v73n02a05

Authors

Joseph Zakaria
Dr. Francis Kofi Bih
Issah Chakurah
Kwaku Antwi
Clara Lily Korkor Tetteh

DOI:

https://doi.org/10.26614/les-wood.2024.v73n02a05

Keywords:

Diospyros mespiliformis, branchwood, density, ebony, heartwood, sapwood, stem

Abstract

This study examines the physical and mechanical properties of the sapwood and heartwood of the stem and branch wood of the West African ebony (Diospyros mespiliformis) to determine if the branch wood can be used for various products. Three mature Diospyros mespiliformis trees with stem diameters at breast height ranging from 50 to 65cm and branch diameters from 25 to 40 cm were purposively selected and felled. Wood samples were prepared to the exact sizes in accordance to the chosen standards, tested, and analysed. The results showed that wood density was insignificantly higher in the stem wood (551 kg/m³) than the branch wood (513 kg/m³). Radially, the heartwood had higher density than the sapwood for both stem wood and branch wood. The Modulus of Elasticity (MOE) was higher in the branch part (7066 MPa) than stem part (1903 MPa), and the sapwood recorded higher MOE for both stem wood and branch wood. Moreover, the Modulus of Rupture (MOR) had a similar result, with the stem part showing a higher average MOR (61 MPa) than the branch part (52 MPa), the sapwood had higher values as compared to its corresponding heartwood. The same trend was observed for the compression strength as well as Janka hardness. In general, it was shown that the branch wood could equally perform well when used as a supplement to the stem wood.

Downloads

Download data is not yet available.

References

Acheampong, R., Antwi, K., Donkoh, M. B., Awotwe-Mensah, M., & Dorwu, F. K. (2024). Chemical properties of Terminalia catappa wood. Les/Wood, 73(1), 45–54. DOI: https://doi.org/10.26614/les-wood.2024.v73n01a04

ASTM-D4442 - Standard Test Methods for Direct Moisture Content Measurement of Wood and Wood Based Materials.

British Standard 373 (1957). Methods of testing small clear specimens of timber. British standard institute, London UK.

BS ISO 3129 (2019). Wood Sampling methods and general requirements for physical and mechanical testing of small clear wood specimens.

CIRAD (2024). African ebony URL: https://tropix.cirad.fr/FichiersComplementaires/EN/Africa/AFRICAN%20EBONY%202023.pdf (14.10.2024)

Dadzie, P. K., Amoah, M., & Inkum, P. B. (2016). Variation in bending strength properties in stem and branch woods as influenced by density and moisture levels in Entandrophragma cylindricum. Australian forestry, 79(4), 233–240. 9158. DOI: https://doi.org/10.1080/00049158.2016.1251816

Dadzie, P. K., Amoah, M., Frimpong-Mensah, K., & Shi, S. Q. (2015). Comparison of density and selected microscopic characteristics of stem and branch wood of two commercial trees in Ghana. Wood Science and Technology, 50(1), 91–104. DOI: https://doi.org/10.1007/s00226-015-0763-3

Desch, H. E., & Dinwoodie, J. M. (1996). Timber: Its structure, properties, and utilization. Macmillan Press Ltd.

Gindl, W., & Teischinger, A. (2002). Axial compression strength of Norway spruce related to structural variability and lignin content. Composite part A: applied science and manufacturing, 33(12), 1623–1628.

Gurau, L., Cionca, M., Mansfield-Williams, H., Sawyer, G., & Zeleniuc, O. (2008). Comparison of the mechanical properties of branch and stem wood for three species. Wood and Fiber Science, 40(4), 647–656.

InsideWood (2024). EBENACEAE Diospyros mespiliformis Hochst. ex A.DC. (W.AFRICAN EBONY) URL: https://insidewood.lib.ncsu.edu/description?5 (14.10.2024)

IUCN (2022). Global Trade and Conservation Status of Ebony Wood. International Union for Conservation of Nature.

Marasigan, O. S., Razal, R. A., Carandang, W. M., & Alipon, M. A. (2022). Physical and mechanical properties of stems and branches of Falcata [Falcataria moluccana (Miq.) Barneby & J.W. Grimes] grown in Caraga, Philippines. Philippine Journal of Science, 151(2), 575–586. DOI: https://doi.org/10.56899/151.02.03

Moreira, L. da S., Andrade, F. W. C., Balboni, B. M., & Moutinho, V. H. P. (2022). Wood from forest residues: Technological properties and potential uses of branches of three species from Brazilian Amazon. Sustainability (Switzerland), 14(18). DOI: https://doi.org/10.3390/su141811176

Pliura, A., Yu, Q., Zhang, S. Y., MacKay, J., Périnet, P., & Bousquet, J. (2005). Variation in wood density and shrinkage and their relationship to growth of selected young poplar hybrid crosses. Forest Science, 51(5), 472–482. DOI: https://doi.org/10.1093/forestscience/51.5.472

PROTA4U (2024). Diospyros mespiliformis. URL: https://prota.prota4u.org/searchresults.asp (14.10.2024)

Rosenkilde, A. (2002). Moisture content profiles and surface phenomena during drying of wood. Kungl Tekniska Hogskolan p1.

Saranpää, P. (1994). Basic density, longitudinal shrinkage and tracheid length of juvenile wood of Picea abies (L.) Karst. Scandinavian Journal of Forest Research, 9(1-4), 68–74.

Siau, J. F. (1984). Transport processes in wood. Springer-Verlag.

Tampori, E. G., Bih, F. K., Antwi, K., & Chakurah, I. (2024). Physical and mechanical properties of wood of plantation grown Albizia lebbeck in the savannah ecological zone, Ghana. Les/Wood, 73(1), 55–68. DOI: https://doi.org/10.26614/les-wood.2024.v73n01a05

Topaloglu, E., & Erisir, E. (2018). Longitudinal variation in selected wood properties of oriental beech and caucasian fir. Maderas. Ciencia y tecnología, 20(3), 403–416.

Tarelkin, Y., Hufkens, K., Hahn, S., Van den Bulcke, J., Bastin, J. F., Ilondea, B. A., & De Cannière, C. (2019). Wood anatomy variability under contrasted environmental conditions of common deciduous and evergreen species from central African forests. Trees - Structure and Function, 33(3), 893–909. DOI: https://doi.org/10.1007/s00468-019-01826-5

Wang, E., Chen, T., Pang, S., & Karalus, A. (2008). Variation in anisotropic shrinkage of plantation-grown Pinus radiata wood. Maderas. Ciencia y tecnología, 10(3), 243–249.

White, S. (2018). Understanding moisture content in ebony wood. Woodworking Today, 15(7), 46–51.

Yisa, E., Okwori, O. R., & Hassan, M. A. (2021). Machines maintenance management practices in sawmill industries in Niger state, Nigeria. AU-eJournal of Interdiciplinary Research, 6(2), 92–102.

Zhao, X., Guo, P., Zhang, Z., Wang, X., Peng, H., & Wang, M. (2018). Wood density and fiber dimensions of root, stem, and branch wood of Populus ussuriensis Kom. trees. BioResources, 13(3), 7026–7036. DOI: https://doi.org/10.15376/biores.13.3.7026-7036