Thermophysiological Comfort Behaviour of Cut Protective Workwear Consisting of Filament Twisted Multicomponent Hybrid Yarn

Zayedul Hasan; Rochak Rathour; Apurba Das; Ramasamy Alagirusamy; Nandan Kumar

doi:10.14502/tekstilec.67.2024085

Authors

Zayedul Hasan Department of Textile and Fiber Engineering, Indian Institute of Technology Delhi, Hauz Khas, 110016 New Delhi, India Author https://orcid.org/0009-0002-5055-475X
Rochak Rathour Department of Textile and Fiber Engineering, Indian Institute of Technology Delhi, Hauz Khas, 110016 New Delhi, India Author https://orcid.org/0000-0001-7522-2458
Apurba Das Department of Textile and Fiber Engineering, Indian Institute of Technology Delhi, Hauz Khas, 110016 New Delhi, India Author https://orcid.org/0000-0002-8134-5064
Ramasamy Alagirusamy Department of Textile and Fiber Engineering, Indian Institute of Technology Delhi, Hauz Khas, 110016 New Delhi, India Author https://orcid.org/0000-0002-8835-7535
Nandan Kumar High-Performance Textiles Pvt. Ltd., Panipat, 132103 Haryana, India Author https://orcid.org/0000-0001-6467-2947

DOI:

https://doi.org/10.14502/tekstilec.67.2024085

Keywords:

protective workwear, cut-resistant, filament twisted core sheath yarn, bulk density, thermal and moisture transmission

Abstract

Current cut protective gear is subject to several difficulties, such as the use of heavy fabric, complicated donning processes, lack of comfort and limited movement. When selecting the most comfortable cut protective fabric, it is important to consider the end users' specific needs. The aim of this study was to enhance the comprehension and optimisation of protective apparel for superior occupational safety and protection by exploring the intricate link between material composition, yarn structure and comfort parameters. Various combinations of filament twisted core sheath yarn consisting of stainless-steel/glass with high-performance polyethylene and polyester wraps were used to fabricate thermo-physiological comfortable cut protective workwear fabric. Twelve cut protective fabrics with the same areal density (200 g/m²) were prepared with 6-end satin weave using filament twisted core sheath yarn of five distinct linear densities (98.4 tex, 73.8 tex, 59.1 tex, 49.2 tex and 39.4 tex). These fabric samples were used to evaluate thermophysiological characteristics, including air permeability, dry and evaporative heat resistance, thermal conductivity, moisture permeability, wettability and moisture wicking according to the established standard. The cut protection of each sample was also measured according to EN 13997. The cut protection and thermo-physiological comfort attributes of cut-resistant clothing are greatly influenced by the proportion of core material (stainless-steel/glass) and yarn structural parameters (linear density and twist direction), which was observed by analysing the results. An increased core material percentage (stainless-steel/glass) contributes to increased fabric thickness and reduced bulk density, which influences the thermophysiological comfort attributes of the developed cut protective workwear fabric. Fabric made from a higher proportion of core material (stainless-steel/glass) with a lower bulk density exhibited an acceptable cut protection level and performed better in terms of thermo-physiological comfort attributes.

Downloads

Download data is not yet available.

References

1. HOLMER, I. Protective clothing in hot environments. Industrial Health, 2006, 44(3), 404–413, doi: 10.2486/indhealth.44.404.

2. Human thermal environments: the effects of hot, moderate, and cold environments on human health, comfort, and performance (3rd ed.). Edited by K. Parsons. Boca Raton : CRC Press, 2014, doi: 10.1201/b16750.

3. LI, D.X. Cut protective textiles. Cambridge : Woodhead Publishing, 2020.

4. DORMAN, L.E., HAVENITH, G. The effects of protective clothing on metabolic rate. In Proceedings of 11th International Conference on Environmental Ergonomics, 2005, 82–85 [online]. Loughborough University [accessed 11.9.2024]. Available on World Wide Web: <https://hdl.handle.net/2134/2553>.

5. DORMAN, L.E., HAVENITH, G. The effects of protective clothing on energy consumption during different activities. European Journal of Applied Physiology, 2009, 105(3), 463–470, doi: 10.1007/s00421-008-0924-2.

6. HOLMER, I. Protective clothing and heat stress. Ergonomics, 1995, 38(1), 166–182, doi: 10.1080/00140139508925093.

7. RATHOUR, R., DAS, A., ALAGIRUSAMY, R. Studies on the influence of process parameters on the protection performance of the outer layer of fire-protective clothing. Journal of Industrial Textiles, 2022, 51, 8107S–8126S, doi: 10.1177/15280837211054582.

8. RATHOUR, R., DAS, A., ALAGIRUSAMY, R. Impact of repeated radiative heat exposure on protective performance of firefighter’s protective clothing. Journal of Industrial Textiles, 2022, 52, 1–30, doi: 10.1177/15280837221117610.

9. PEASE, A.L. Heat stress evaluation of protective clothing ensembles: Master Thesis. Department of Environmental Occupational Health College of Public Health University of South Florida, 2010, https://digitalcommons.usf.edu/etd/3485.

10. RAJPUT, B., MAHESH, N., RATHOUR, R., DAS, T., RAY, B., DAS, A., TALUKDAR, P. Performance analysis of multilayer flame-retardant fabric ensembles for different exposure conditions using numerical modeling. The Journal of Industrial Textiles, 2022, 115(2), 218–227, doi: 10.1080/00405000.2022.2156717.

11. FU, M., WENG, W., YUAN, H. Quantitative assessment of the relationship between radiant heat exposure and protective performance of multilayer thermal protective clothing during dry and wet conditions. Journal of Hazardous Materials, 2014, 276, 383–392, doi: 10.1016/j.jhazmat.2014.05.056.

12. O’BRIEN, C., BLANCHARD, L.A., CADARETTE, B.S., ENDRUSICK, T., XU, X., BERGLUND, L., SAWKA, M.N., HOYT, R.W. Methods of evaluating protective clothing relative to heat and cold stress: thermal manikin, biomedical modeling, and human testing. Journal of Occupational and Environmental Hygiene, 2011, 8(10), 588–599, doi: 10.1080/15459624.2011.613291.

13. KOFLER, P., HERTEN, A., HEINRICH, D., BOTTONI, G., HASLER, M., FAULHABER, M., BECHTOLD, T., NACHBAUER, W., BURTSCHER, M. Viscose as an alternative to aramid in workwear: influence on endurance performance, cooling, and comfort. Textile Research Journal, 2013, 83(19), 2085–2092, doi: 10.1177/0040517513487784.

14. YOO, S., BARKER, R.L. Comfort properties of heat-resistant protective workwear in varying conditions of physical activity and environment. Part I: thermophysical and sensorial properties of fabrics. Textile Research Journal, 2005, 75(7), 523–530, doi: 10.1177/0040517505053949.

15. YOO, S., BARKER, R.L. Comfort properties of heat resistant protective workwear in varying conditions of physical activity and environment. Part II: perceived comfort response to garments and its relationship to fabric properties. Textile Research Journal, 2005, 75(7), 531–539, doi: 10.1177/0040517505054190.

16. LEVINE, L., SAWKA, M.N., GONZALEZ, R.R. Evaluation of clothing systems to determine heat strain. American Industrial Hygiene Association Journal, 1998, 59(8), 557–562, doi: 10.1080/15428119891010730.

17. SURI, M., RASTOGI, D., KHANNA, K., CHAKRABORTY, M. Development of protective clothing for pesticide industry. Part I: assessment of various finishes. Indian Journal of Fibre & Textile Research, 2002, 27(1), 85–90.

18. MOHAMMADI, R.A., SHIRAZI, M., MOAREF, R., JAMALPOUR, S., TAMSILIAN, Y., KIASAT, A. Protective smart textiles for sportswear. In Protective textiles from natural resources. Edited by Md. Ibrahim H. MONDAL. Cambridge : Woodhead Publishing, 2022, 317–345, doi: 10.1016/B978-0-323-90477-3.00025-0.

19. MISHRA, K., DEDHIA, E. Balancing aesthetics, and functionality with comfort: compliance-friendly protective clothing. International Journal of Home Science, 2022, 8(3), 7–15, doi: 10.22271/23957476.2022.v8.i3a.1342.

20. Wear comfort [Online]. Hohenstein [accessed 20 July 2024]. Available on World Wide Web: <https://www.hohenstein.in/en-in/expertise/performance/comfort>.

21. BARTKOWIAK, G. Liquid sorption by nonwovens containing superabsorbent ﬁbers. Fibres and Textiles in Eastern Europe, 2006, 14(1), 57–61.

22. GUIDOTTI, T.L. Human factors in ﬁreﬁghting: ergonomic-, cardiopulmonary-, and psychogenic stress related issues. International Archives of Occupational and Environmental Health, 1992, 64, 1–12, doi: 10.1007/BF00625945.

23. NAYAK, R., PUNJ, S.K., CHATTERJEE, K.N., BEHRA, B.K. Comfort properties of suiting fabrics. Indian Journal of Fibre & Textile Research, 2009, 34, 122–128.

24. SLATER, K. Comfort properties of textiles. Textile Progress, 1977, 9(4), 1–70, doi: 10.1080/00405167.1977.10750095.

25. YAN, D., HAO, A. Functional protective clothing and new material application. Cotton Textile Technology, 2012, 40(2), 65–68.

26. RATHOUR, R., DAS, A., ALAGIRUSAMY, R. Study on the influence of constructional parameters on performance of outer layer of thermal protective clothing. The Journal of Textile Institute, 2023, 114(9), 1336–1346, doi: 10.1080/00405000.2022.2124650.

27. RATHOUR, R., DAS, A., ALAGIRUSAMY, R. Water vapor transmission and electromagnetic shielding characteristics of stainless steel/viscose blended yarn woven fabrics. Journal of Industrial Textiles, 2023, 53(2), 1–20, doi: 10.1177/15280837221149217.

28. ZHOU, H., HUANG, X., FU, Y. A comparative study of China and Europe personal protective equipment standards. China Personal Protective Equipment, 2014, 2, 26–41.

29. KIM, J. O., SPIVA, S.M. Dynamic moisture vapor transfer through textile Part II: Further techniques for microclimate moisture and temperature measurement. Textile Research Journal,1994, 64(2), 112–121, doi: 10.1177/004051759406400207.

30. DUTSCHK, V., SABBATOYSKIY, K.G., STOLZ, M., GRUNDKE, K., RUDOYR, V.M. Unusual wetting dynamics of aqueous surfactant solutions on polymer surfaces. Journal of Colloid and Interface Science, 2003, 267(2), 456–462, doi: 10.1016/S0021-9797(03)00723-9.

31. SENGUPTA, A.K., SREENIVASA MURTHY, H.V. Wicking in ring spun vis-α-vis rotor spun yarns. Indian Journal of Fibre & Textile Research, 1985, 10, 155–157.

32. DAS, A., ALAGIRUSAMY, R., KUMAR, K.P. Study of heat transfer through multilayer clothing assemblies: a theoretical prediction. Autex Research Journal, 2011, 11(2), 54–60, doi: 10.1515/aut-2011-110205.

33. HOUSHYAR, S., PADHYE, R., NAYAK, R. Effect of moisture-wicking materials on the physical and thermophysiological comfort properties of firefighters’ protective clothing. Fibers and Polymers, 2017, 18(2), 383–389, doi: 10.1007/s12221-017-6746-2.

34. EN 388. Protective gloves against mechanical risks. Plzen : European Standard, 2016, 1-2.

35. The science of cut protection [online]. Dupont [accessed 20 July 2024]. Available on World Wide Web: <https://www.rpta.org/safety/1Kevlar.pdf>.

36. JHANJI, Y., GUPTA, D., KOTHARI, V.K. Thermal and mass transport properties of polyester–cotton plated fabrics in relation to back layer fibre profiles and face layer yarn types. Journal of Industrial Textiles, 2018, 109(5), 669–676, doi: 10.1080/00405000.2017.1363948.

37. BIVAINYTĖ, A., MIKUČIONIENĖ, D., KERPAUSKAS, P. Investigation on thermal properties of double-layered weft knitted fabrics. Materials Science, 2012, 18(2), 167–171, doi: 10.5755/j01.ms.18.2.1921.

38. ONOFREI, E., ROCHA, A.M., CATARINO, A. The influence of knitted fabrics’ structure on the thermal and moisture management properties. Journal of Engineered Fibers and Fabrics, 2011, 6(4), 10–22, doi: 10.1177/155892501100600403.

39. SONG, G., PASKALUK, S., SATI, R., CROWN, E.M., DALE, J.D. Thermal protective performance of protective clothing used for low radiant heat protection. Textile Research Journal, 2011, 81(3), 311–323, doi: 10.1177/0040517510380108.

40. Textiles for protection. Edited by R. A. Scott. Cambridge : Woodhead, 2005, 622–647.

41. BAGHERZADEH, R., GORJI, M., LATIFI, M., PAYYANDYP, P., KONG, L. Evolution of moisture management behavior of high-wicking 3D warp knitted spacer fabrics. Fibers and Polymers, 2012, 13, 529–534, doi: 10.1007/s12221-012-0529-6.

42. HOUSHYAR, S., PADHYE, R., TROYNIKOV, O., NAYAK, R., RANJAN, S. Evaluation and improvement of thermo-physiological comfort properties of firefighters’ protective clothing containing super absorbent materials. The Journal of The Textile Institute, 2015, 106(12), 1394–1402, doi: 10.1080/00405000.2014.995930.

43. ISLAM, M.A., RATHOUR, R., AMIN, M.J.I., DAS, A., ALAGIRUSAMY, R. Protective and comfort performance of fire protective clothing. Textile Leather Review, 2024, 7, 597–615, doi: 10.31881/TLR.2024.066.

44. DAS, B., DAS, A., KOTHARI, V.K., FANGUEIRO, R., de ARAÚJO, M. Moisture transmission through textiles. Part I: processes involved in moisture transmission and the factors at play. Autex Research Journal, 2007, 7(2), 100–110, doi: 10.1515/aut-2007-070204.